This series screw air compressor can be directly used in coal mine roadway construction project, and it can move forward with the extension of roadway. It can keep higher air pressure, and make the mechanical efficiency of pneumatic tools more than ground air supply increased by 30% to 100%, power consumption decreased by 30%. It can also save a lot of pipes. It is featured with stable working condition, low noise, long service life, and high efficiency. Gas control system is stable and reliable. Automatically adapt to 0-100% load and adjust the power consumption according to the actual gas usage.
It has protections like anti-explosion, overload, short circuit, open-phase, earth leakage and so on. It also has warnings of overheat, empty filter clogging, clogging of oil screen and wick jam. Due to the over-temperature protection device, it will shut down if the temperature is too high. Except that, it has treble protection including air-condition, low pressure valve, safety valve to avoid overpressure operation, which makes it safe and reliable to use. Exclusive designing high-performance oil-gas separator, vertical oil-gas tank structure strengthen the gravity and centrifugal separating effect; realize the exhaust oil content less than 3ppm. Double process plate-fin air patenting cooler, the oil cooling is twice compared with common cooler, has better cooling effect. Exclusive designing high-performance oil-gas separator, vertical oil-gas tank structure strengthen the gravity and centrifugal separating effect; realize the exhaust oil content less than 3ppm. Double process plate-fin air patenting cooler, the cooling performance of oil cooling is twice compared with common cooler.
Features
Features of Explosion-proof Screw Air Compressor:Parameters
MLGF series -model
|
Discharge pressure Mpa
|
Volume flow
m3/min |
Noise dB(A)
|
Exit temperature(℃)
|
Oil content PPM
|
Motor power KW(HP)
|
Net weight kg
|
External dimension mm
|
Connection type
|
Gauge mm
|
Voltage v
|
MLGF10/7-55G
|
0.7
|
10
|
72±3
|
≤110
|
≤3
|
55(75)
|
2200
|
3005*1100*1562
|
Direct connection
|
600/900
|
380/660
|
MLGF13/7-75G
|
0.7
|
13
|
72±3
|
≤110
|
≤3
|
75(100)
|
2520
|
3070*1100*1582
|
Direct connection
|
600/900
|
380/660
|
MLGF20/7-110G
|
0.7
|
20
|
72±3
|
≤110
|
≤3
|
110(150)
|
3350
|
3460*1200*1782
|
Direct connection
|
600/900
|
380/660
|
Tag: Mill Drill | Mill Drilling Rig